The BohH 90 equipment key may be requested by departments or by faculty teaching inBohH 90.
Classroom keys and building master keys do not open these locks. Departments with faculty or staff needing access to the AV /computer equipment may want to have a key in their department office available for checkout. Or faculty and staff who make frequent use of classroom equipment may want to request a key for their personal use. In either case, a key request card must be completed, signed by the Dean or Department Head, and delivered to Facilities Management Key Shop. "AV Cabinets" must be printed at the top of the card to specify that the requested key is for the equipment cabinet and not for the room itself. A separate key request card for the room must be completed to obtain a room key.
The projection screen in BohH 90 is raised and lowered by an electric motor. The screen control switch is located on the front wall on the left side of the chalk board. Lower the switch to the down position.
The screen will automatically stop in the correct down position.
The projector is located in the black wooden box at the front of the room in the center of the first row of seats. Use the equipment cabinet key to unlock the top door which covers the projector. The lock is located on the left side of the box as you face class.
Manually lift the projector to its full operating height. Gently lift up on the handles on the lift mechanism using only enough force to assist the lift mechanism on which the projector sits. The lift mechanism does most of the work. Guide the projector upward to its full extension.
To turn the projector on, make sure that the power button is set to the ON postion on the projector.
The projector remote is located in the cabinet. It is labeled "Projector Remote". Press the STANDBY/ON button on the remote.
Warm-up will begin. It should take the projector a moment to warm up.
Pressing the video button on the projector remote will allow the image to be projected to the class.
All of the projector functions are controlled from the remote. Adjust the picture size using the zoom button and the focus using the focus button on the remote if required.
If you experience difficulties see: Troubleshooting Hitachi Projector Problems.
The DVD player is located in the equipment closet at the front left side of the room as you face the class.
Use the BohH 90 equipment key to unlock the closet.
The main power button is located below VCR/DVD Player.
Press this button.
The audio receiver located in the top portion the equipment closet.
Press the main power button on the receiver.
When the button is pressed in, the unit is in Standby mode as indicated by the amber light. This button must be pressed in to operate the unit.
Then press the Standby/On button on the receiver.
When the unit is in operation, the indicator light is blue.
Next, press the Source button until "1 Analog " is displayed on the front of the reciever.
The close caption converter is located in the equipment cabinet. Press the closed caption power button.
A red indicator light shows when it is on.
The DVD/ VCR combo unit is located in the podium/instructor station.
The unit has two sections.
Press the POWER button.
The unit will turn on and the power indicator will illuminate.
Press the OPEN/CLOSE button in the DVD section.
Hold your disc by its edges and gently place it into the tray with the playback side down. Their are two different disc sizes. Place the disc in the correct guide, If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Press OPEN/CLOSE to close the disc tray.
Press the PLAY button. The disc will begin. The disc tray closes automatically. You can use the VCR/DVD remote for additional functions as needed while playing your disc.
Please Note: If the player is playing your disc, but the picture is not being projected to the screen, it is possible that the projector is taking its input from a source other than the DVD player. Be sure you have pressed the "Video" button the projector remote as explained in step #6.
The projector provides the best picture quality and brightness in a dark or dimly lit room. The lighting control switches are located on the right front wall of the room near the exit. To dim the front of the room while leaving adequate lighting for the students to take notes, turn off all but the back row of lights. Turn off the switches labeled "stage ceiling lights", "ceiling front", and "ceiling dimmer relay". You might want to experiment to find the best lighting option for your purposes. It is best to adjust the lights after you have everything set up so you can more easily see the operating controls.
Full room lighting can be restored by switching on the switches labeled "stage ceiling lights", "ceiling front", and "ceiling dimmer relay"
To stop playing the disc press the STOP button.
Press the OPEN/CLOSE button.
Remove your disc.
Press the POWER button. The VCR/DVD unit will shut off.
Press the Standby/On button the receiver to turn it off.
Lower the power switch to the off position.
Close and lock the equipment closet door using the BohH 90 equipment key.
To turn the projector OFF press the STANDBY / ON button.
The following message will be displayed on the screen
"Power off?"
"yes; press power button"
The message will disappear by any operation or by no operation for five seconds. If you are sure you want to turn off the projector, press the STANDBY / ON button a second time within that five second time slot. The projector lamp is extinguished and the lamp cooling begins. The unit will shut itself completely off shortly.
Gently push down on the projector until it is all the way down into the box.
Use the equipment cabinet key to lock the black box.
Please double check to make sure that the box is locked.
Raise the switch to the up position.
Information Technology Systems & Services