The Chem 200 equipment key may be requested by departments or by faculty teaching in Chem 200.
Classroom keys and building master keys do not open these locks. Departments with faculty or staff needing access to the AV /computer equipment may want to have a key in their department office available for checkout. Or faculty and staff who make frequent use of classroom equipment may want to request a key for their personal use. In either case, a key request card must be completed, signed by the Dean or Department Head, and delivered to Facilities Management Key Shop. "AV Cabinets" must be printed at the top of the card to specify that the requested key is for the equipment cabinet and not for the room itself. A separate key request card for the room must be completed to obtain a room key.
There are two projection screens in Chem 200, each raised and lowered by an electric motor. Use the screen at the center of the front wall for video projector presentations. To lower the screen, press the Down arrow button on the screen control switch. Press the button once and release it. The screen will automatically stop in the correct down position. This switch is located on the front wall of the auditorium, just to the left of the keyed switch for the projector lift mechanism.
The slide projector is located in the instruction table. Use the Chem 200 cabinet key to unlock the left door. An extra bulb and the remote are also located in this cabinet.
The pedestal is located between seats 158 and 159.
Plug in the power and remote cords into the receptacles on the pedestal. Place your slide carousel on the projector and turn on the lamp to the on position.
Take out the wired slide projector remote for operating the projector from the front of the room.
The projector provides the best picture quality and brightness in a dark or dimly lit room. To dim the front of the room while leaving adequate lighting for students to take notes, press the top button on the rightmost lighting control switch.
The lighting control switches are located on the left front wall of the room near the exit. Other lighting options can be selected by pressing other buttons on the two lighting control switches. You might want to experiment to find the best lighting option for your purposes.
It is best to adjust the lights after you have set up so you can more easily see the equipment controls.
Full room lighting can be restored by pressing the top button on the left-hand lighting control switch.
Other lighting options can be selected by pressing other buttons on the two lighting control switches. You might want to experiment to find the best lighting option for your purposes.
Remove your slide carousel from the projector and turn the lamp to the off position. Unplug the power and remote cords from the receptacles on the pedestal.
Close the cabinet door and lock it using the Chem 200 cabinet key.
This switch is located on the front wall of the auditorium, just to the left of the keyed switch for the projector lift mechanism.
Information Technology Systems & Services