Using the PC

1. Get the wireless keyboard and mouse.

The wireless keyboard and mouse are located in DAdB 520A, on top of the equipment rack.

They are on the very top.

Take them out and place them on the conference room table in DadB 520.

They are the standard type wireless keyboard and mouse.

2. Lower the screen.

The controls for the screen and other A.V. equipment are on the control touch panel, which is located on the wall at the back of the room.

It is on the right side of the projector window.

The projection screen is raised and lowered by an electric motor.

To lower the screen, press the Screen button on the control panel.

The screen button is located in the upper right.

Press the Lower button.

The lower button is on the left.

Then press the Escape button.

The escape button is in the lower right corner.

3. Press the Computer button on the control panel.

Pressing the Computer button will allow the image on the computer screen to be projected.

It is the center of the main menu.

4. Use the Computer.

The computer is normally left on, so you do not have to bother starting it up or shutting it down.

Just choose a program and use the computer as you normally would.

5. Adjust the sound if needed.

The control panel has several buttons to control and adjust sound.

From the main menu you can mute the AV sound.

It is located on the bottom center of the main menu control panel.

Press the AV Mute button once to mute AV sound. Press it a second time to restore the AV sound.

To adjust the volume, first press the Volume button on the main menu.

It is located in the bottom left of the main menu control panel.

The Program Volume menu will appear.

The increase volumne button is directly above the decrease button. The Mute button is to their right.

Use the two buttons on the left side to increase or decrease the volume. Press the Mute button, on the left side once to mute the sound. Press it a second time to restore the sound.

6. Turn off the projector.

When you are finished, touch the System Off button on the control panel.

It is in the upper right corner.

You will be asked if you want to shut down.

The Yes button is on the left.

Select the Yes button to verify that you do indeed want to shut the system down. If you select the No button, you will be taken back to the main menu.

After you select Yes, the AV system will begin it's power down cycle. It will take the projector a couple of minutes to shut down.

The power down cycle can take up to two minutes.

7. Raise the projection screen.

Press the Screen button on the control panel's main menu.

It is located in the right lower corner, just to the right of the AV Mute button.

Then press the Raise button.

It is located on the right side of the control panel, below the system off button, and above the escape button.

8. Return the wireless keyboard and mouse.

Return wireless keyboard and mouse to DadB 520A. Place them on top of the equipment rack.

DAdB 520: Using the PC.