The MonH 203 equipment cabinet key may be requested by departments or by faculty teaching in this room.
Classroom keys and building master keys do not open these locks. Departments with faculty or staff needing access to the AV /computer equipment may want to have a key in their department office available for checkout. Or faculty and staff who make frequent use of classroom equipment may want to request a key for their personal use. In either case, a key request card must be completed, signed by the Dean or Department Head, and delivered to Facilities Management Key Shop. "AV Cabinets" must be printed at the top of the card to specify that the requested key is for the equipment cabinet and not for the room itself. A separate key request card for the room must be completed to obtain a room key.
The projector controls and other equipment are located on and in the equipment cabinet/podium at the front of the room. This cabinet has one lock. Use the equipment cabinet key to unlock it.
Then open the door.
The projection screen is located at the front of the room.
Pull the cord on the screen to lower it.
The control panel is located on top of the podium.
Press the DVD/VHS button.
The light next to the button will flash red indicating that the projector is warming up. After two to three minutes the flashing will stop and the light will become constant red, indicating that the projector is ready for use.
The close caption converter is located in the equipment cabinet. Press the closed caption power button.
A red indicator light shows when it is on.
The DVD/ VCR combo unit is located in the podium/instructor station.
The unit has two sections.
Press the POWER button.
The unit will turn on and the power indicator will illuminate.
Press the OPEN/CLOSE button in the DVD section.
Hold your disc by its edges and gently place it into the tray with the playback side down. Their are two different disc sizes. Place the disc in the correct guide, If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Press OPEN/CLOSE to close the disc tray.
Press the PLAY button. The disc will begin. The disc tray closes automatically. You can use the VCR/DVD remote for additional functions as needed while playing your disc.
The control panel has several buttons to control and adjust sound.
There is also a Video Mute button. If you press it one time, it blanks out the video. If you press it a second time the video will be restored.
The lighting controls are located by the exit.
The projector provides the best picture quality and brightness in a dark or dimly lit room. You might want to experiment to find the best lighting option for your purposes. It is best to adjust the lights after you have started so you can more easily see the operating controls. Restore the room lighting when you are finished.
To stop playing the disc press the STOP button.
Press the OPEN/CLOSE button.
Remove your disc.
Press the POWER button. The VCR/DVD unit will shut off.
Press the "System Off" button on the control panel.
The light next to the button will flash indicating that the projector is shutting down. If you want to turn they system back on again, after you have pressed the "System Off" button you must wait until until its light has stopped flashing.
Pull the cord on the screen to raise it.
Close and lock the door using the equipment key.
Please double check to make sure that it is locked.
Information Technology Systems & Services