MonH 70 : Using the Projection Screen.

1. Obtain the keys.

The MonH 70 equipment cabinet key may be requested by departments or by faculty teaching in this room.

Classroom keys and building master keys do not open these locks. Departments with faculty or staff needing access to the AV /computer equipment may want to have a key in their department office available for checkout. Or faculty and staff who make frequent use of classroom equipment may want to request a key for their personal use. In either case, a key request card must be completed, signed by the Dean or Department Head, and delivered to Facilities Management Key Shop. "AV Cabinets" must be printed at the top of the card to specify that the requested key is for the equipment cabinet and not for the room itself. A separate key request card for the room must be completed to obtain a room key.

2. Unlock and open the equipment cabinet doors.

The projector controls and other equipment are located in the equipment cabinet at the front of the room. This cabinet has two locks. Use the equipment cabinet key to unlock them.

Then open the doors.

3. Lower the screen.

The projection screen in MONH 70, is raised and lowered by an electric motor. To lower the screen, lower the screen control switch to the down position. This switch is located on the wall beside the equipment cabinet.

The screen will automatically stop in the correct down position.

4. Turn on the projector.

The projector remote is located in the equipment cabinet. It is labeled "Projector Remote". To turn the projector on, press the STANDBY/ON button.

Warm-up will begin. It should take the projector a moment to warm up.

5. Use the Computer and AV equipment.

See further documentation for using the AV equipment in this room. MonH 70 is equipped with a slide projector, VCR, DVD and computer connection.

6. Adjust the lighting.

The projector provides the best picture quality and brightness in a dark or dimly lit room. The lighting control switches are located on the left wall of the room near the equipment cabinet. You might want to experiment to find the best lighting option for your purposes.

It is best to adjust the lights after you have set up so you can easily see the operating controls. Restore the room lighting when you are finished.

7. Turn off the video projector.

To turn the projector OFF press the STANDBY / ON button.

The following message will be displayed on the screen
"Power off?"
"yes; press power button"

The message will disappear by any operation or by no operation for five seconds. If you are sure you want to turn off the projector, press the STANDBY / ON button a second time within that five second time slot. The projector lamp is extinguished and the lamp cooling begins. The unit will shut itself completely off shortly.

8. Raise the projection screen.

The projection screen in MONH 70, is raised and lowered by an electric motor. To raise the screen, raise the screen control switch to the up position. This switch is located on the wall beside the equipment cabinet.

The screen will automatically stop in the correct up position.

9. Close and lock the equipment cabinet doors.

Close and lock the equipment cabinet doors using the equipment key.

Please double check to make sure that the cabinet is locked.