The MonH 70 equipment cabinet key may be requested by departments or by faculty teaching in this room.
Classroom keys and building master keys do not open these locks. Departments with faculty or staff needing access to the AV /computer equipment may want to have a key in their department office available for checkout. Or faculty and staff who make frequent use of classroom equipment may want to request a key for their personal use. In either case, a key request card must be completed, signed by the Dean or Department Head, and delivered to Facilities Management Key Shop. "AV Cabinets" must be printed at the top of the card to specify that the requested key is for the equipment cabinet and not for the room itself. A separate key request card for the room must be completed to obtain a room key.
The slide projector and remote control are located in the projection booth at the rear of the room. You must furnish your own slide tray. Go around to the side of the booth and use the MonH 70 equipment key to unlock the door.
This cord is normally plugged into the receptacle labeled "Switched" on the right side wall of the booth. If it is unplugged, plug it in now.
After the projector is plugged into the "Switched" receptacle you can turn the power on and off from this switch or from the one at the front of the room
Place your slide carousel on the projector and turn the power to the "HI" position.
This cable is normally plugged into the back of the slide projector. If it is not plugged into the back of the projector, find the cable labeled "Slide Projector" and plug it into the back socket of the projector.
The hand remote unit is also located on the shelf below the slide projector in the projection booth.
Take it from the projection booth and bring it to the front of the room.
This receptacle is located in the front of the classroom below the blackboard. Plug in the remote.
The slide projector can now be operated via the remote unit at the front of the room. It can also be turned on and off via the "Remote Slide Power" switch.
This switch is located near the remote receptacle.
The projection screen in MONH 70, is raised and lowered by an electric motor. To lower the screen, lower the screen control switch to the down position. This switch is located on the wall beside the equipment cabinet.
The screen will automatically stop in the correct down position.
The projector provides the best picture quality and brightness in a dark or dimly lit room. The lighting control switches are located on the left wall of the room near the equipment cabinet. You might want to experiment to find the best lighting option for your purposes.
It is best to adjust the lights after you have set up so you can easily see the operating controls. Restore the room lighting when you are finished.
The projection screen in MONH 70, is raised and lowered by an electric motor. To raise the screen, raise the screen control switch to the up position. This switch is located on the wall beside the equipment cabinet.
The screen will automatically stop in the correct up position.
Replace it on the shelf below the slide projector.
Close and lock the projection booth door using the MonH 70 equipment key.
Information Technology Systems & Services