Beena Bhat (M Eng, 2000)

“Assessment of Flexural Models for FRP Reinforced Pre-Tensioned Bonded Beams and Post-Tensioned Unbonded Concrete Beams”
Shuangbi Chen (M Eng, 2001)

“Concrete Bridge Assessment and Rehabilitation”
Xinmei Li (MS, 2001)

“Evaluation of Bleed Resistant Grout for Post-Tensioning”
Shivprakash Iyer (MS, 2002)

“Evaluation of ultrasonic C-Scan Imaging to Detect Corrosion and Voids in Post-Tensioning Tendons”
Seung Chul Lee (MS, 2002)

“Parametric Study of the Effect of Tendon Layouts on the Performance of Post-Tensioned Two-Way Slab Systems”
Kevin Smith (MS, 2002)

“Evaluating Bridge Deck Design Factors Using Concrete Resistivity”
Edwin Salcedo (MS, 2003)

“Emulsifiable Oils for Temporary Corrosion Protection of Post-Tensioned Tendons”
Matthew Bricker (MS, 2003)

“Avoiding Corrosion of Post-Tensioned Tendons from Grout Bleed Water”
Justin Brennan (MS/BS Honors Dual Degree, 2003)

“Monitoring of the Fallingwater External Post-Tensioned Retrofit”
Alexandre Pacheco (Ph.D., Fall 2003)

“Accelerated Corrosion Testing Methods Including Effects from Concrete Resistivity”
Jessica DeSalvo (MS, Fall 2003)

“Effects of Vibration on Early-Age Properties of Post-tensioning Grouts”
Daniel Luther (MS, Summer 2004)

“Prestressing Losses in Spliced Girder Applications”
Erik Villari (MS, Summer 2004)

“Crack Width Evaluation in Prestressed Concrete with Pre and Post-Tensioning”
Shaun Mason (MS, Summer 2004)

“Evaluation of Field Techniques for Corrosion Monitoring”
Eric Musselman (MS/BS Honors Dual Degree, Fall 2004)

“Investigation of Self-Fabricating Nanosensors for Use as Embedded Strain Sensors in Concrete”
Melissa Brooks (MS, Fall 2004)

“Electrochemical Methods for Investigation of Post-tensioning Grouts”
Emily Moser (MS, Spring 2004)

“Long Carbon Fiber Concrete under Impact Loads”
Kunjan Shukla (MS, Spring 2005)

“Development of a Small Scale Post-Tensioning Grout Bleed Test”
January Meley, (PhD, Fall 2006)

“Evaluation of Cathodic Protection of Above Ground Storage Tanks”
Thara Viswanath, (MS, Spring 2007)

“Polyurea Coatings for Blast and Impact Resistance”
Brian Swartz, (MS, Spring 2007)

“Post-Tensioned Precast Panels for Rapid Bridge Deck Replacement”
Eric Musselman, (PhD, Summer 2007)

“Long Fiber Concrete for Blast and Impact Resistance”
Rich Myers, (MEng, Fall 2007)

“Modeling of Reinforced Concrete Barriers Subjected to Close Range Blast”
Nick Cervo, (MS, Spring 2008)

“Development of Test Methods for Bridge Deck Patching Materials”
Andy Coughlin, (MS, Summer 2008)

“Specification Development for Long Carbon Fiber Blast Resistant Concrete”
Jeffery Volz (PhD, Summer 2008)

“Durability of Partially Post-Tensioned Members under Cyclic Loading in an Aggressive Environment”
Ashutosh Srivastava, (MS, expected Fall 2008)

“Non-Destructive Methods for Sinkhole Evaluation”
Edwin Salcedo, (PhD, expected Spring 2009)

“Shear Design Provisions for Post-Tensioned Segmental Bridges”
Brian Swartz, (PhD, expected Spring 2010)

“Evaluation of Methods for Evaluating Prestress Losses”